Citizen CT-E351 - FS 2 A1 A2 [D] K

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 186 -
FS 2 a1 a2 [d] k
[Function] Defining external character
[Code] <1C>H<32>H<a1>H<a2>H [<d>] k
[Range] Japanese Kanji specifications:
• In case of JIS code system
a1=<77>H, <21>H≤a2≤<7E>H
• In case of Shift JIS code system
a1=<EC>H, <40>H≤a2≤<7E>H, <80>H≤a2≤<9E>H
Multilingual specifications (Hangul, Chinese):
a1=<FE>H, <A1>H≤a2≤<FE>H
Common
0≤d≤255
k=72(FONTA: 24×24)
k=32(FONTC: 16×16)
CT-S2000/CT-S4000
k=60(FONTB: 20×24)
[Outline] [The specification which is common to the model]
• Defines external Kanji character.
• a1, a2 show Kanji code to define external character and definition of 94 characters are available.
• “d” is data to be defined and the number of data to be defined is 72 bytes of vertical 3 bytes × 24 dots.
• Each data is created by “1” for printed dot and “0” for unprinted dot.
[The specification which depend on the model]
CT-S280/CT-S300/CT-S310/CT-S2000/CT-S4000/
CT-S801(II)/CT-S851(II)/CT-S601(II)/CT-S651(II)/CT-S310II/CT-S251/CT-D150/CT-E351/CT-D1
51/CT-E651
• In multilingual specifications (Chinese, Hangul), font B, font C cannot define.
[Default] [The specification which is common to the model]
All are space.
[The specification which depend on the model]
CT-S310 II/CT-S801II/CT-S851II/CT-S601II/CT-S651II/CT-S251/CT-D150/CT-E351
/CT-D151/CT-E651
If external character is not defined for the address, JIS level 3 character assigned for the same
address is printed.
[Caution] [The specification which depend on the model]
CT-S310 II/CT-S801II/CT-S851II/CT-S601II/CT-S651II/CT-S251/CT-D150/CT-E351
/CT-D151/CT-E651