Citizen CT-E351 - Bar Code Commands; GS H N

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 154 -
2.2.12 Bar Code Commands
GS H n
[Function] Selecting of printing position of HRI characters
[Code] <1D>H<48>H<n>
[Range] 0≤n≤3, 48≤n≤51
[Outline] [The specification which is common to the model]
• Selecting printing position of HRI characters in printing bar codes.
• “n” means the followings.
n
Printing Position
0, 48
No printing
1, 49
Above the bar code
2, 50
Below the bar code
3, 51
Both above and below the bar code
The HRI characters refer to the bar code-turned characters so that you can read them.
[Default] n=0
[See Also] GS f, GS k
[Sample Program] [Print Results]
LPRINT CHR$(&H1B);”3”; CHR$(5);
LPRINT CHR$(&H1D);”h”; CHR$(50);
LPRINT CHR$(&H1D);”H”; CHR$(0);
GOSUB BC
LPRINT CHR$(&H1D);”H”; CHR$(1);
GOSUB BC
LPRINT CHR$(&H1D);”H”; CHR$(2);
GOSUB BC
LPRINT CHR$(&H1D);”H”; CHR$(3);
GOSUB BC
END
BC:
LPRINT CHR$(&H1D);”k”;
LPRINT CHR$(4);
LPRINT “12”; CHR$(0);
LPRINT CHR$(&HA);
RETURN
＊ 1 2 ＊
＊ 1 2 ＊
＊ 1 2 ＊
＊ 1 2 ＊
No HRI characters
Printed above
Printed below
Printed above and below