Support 
model 
 
- 356 - 
fn=9: Function 9 Defining Data in the Raster Format to the Character Code Page of Work Area 
GS ( E pL pH fn x c1 c2  [y d1...d(x×y)] k 
 
 [Code]   <1D>H<28>H<45>H<pL><pH><fn><x><c1><c2> [<y><d1>..<d(yXx)>] <k> 
 
 [Range]   5≤(pL+pH×256)≤65535 
fn=9 
x=1(At selection of font C), x=2 (At selection of other than font C) 
128≤c1≤c2≤255 
0≤y≤24 (At selection of font A) 
0≤y≤16 (At selection of font C), 0≤d≤255 
k=c2-c1+1 
CT-S300/CT-S310/CT-S801/CT-S851/CT-S601/CT-S651/CT-P29x series 
0≤x≤17 (At selection of font B) 
CT-S280/CT-S281/CT-S2000/CT-S4000/ CT-S310II/ 
CT-S801II/CT-S851II/CT-S601II/CT-S651II/CT-S251/CT-D150/CT-E351/CT-D151/ CT-E651 
0≤x≤24 (At selection of font B) 
 
 
 [Outline]    [The specification which is common to the model]  
• Defines the data in raster format in units of character on the character code page in work area. 
• Operates only in printer function setting mode. 
 
         
Data structure(12×24) 
 
            d1 (odd number)     d2 (even number) 
 
 
d1 
3 
7 
9 
11 
13 
15 
17 
19 
21 
23 
25 
27 
29 
31 
33 
35 
37 
39 
41 
43 
45 
47 
 
 
 
 
Bits 3 through 0 are not character data