Citizen CT-E351 - ESC = N

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 387 -
ESC = n
[Function] Data input control
[Code] <1B>H<3D>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
• Selecting equipment for which data input from the host is valid.
• Each bit of “n” indicates as follows.
• When the printer has not been selected, this printer abandons all the received data until it is selected by this
command.
Bit Equipment
Value
0
1
0
Printer
Invalid
Valid
1
Not defined
—
—
2
Not defined
—
—
3
Not defined
—
—
4
Not defined
—
—
5
Not defined
—
—
6
Not defined
—
—
7
Not defined
—
—
[Caution] [The specification which is common to the model]
• Even when the printer has not been selected, it can become BUSY state through printer
operation.
• When the printer is deselected, this printer discards all the data until it is selected with this command. (Except
DLE EOT, DLE ENQ, and DLE DC4)
[Default] n=1