Support
model
- 69 -
2.2.3 Print Character Commands
CAN
[Function] Canceling print data in PAGE MODE
[Code] <18>H
[Outline] [The specification which is common to the model]
Erases all data contained in the currently effective print area in PAGE MODE.
[Caution] • This command is only effective when PAGE MODE is selected.
• If the previously established print area overlaps the currently effective print area, the overlapped data in the
previously established area will be erased.
[See Also] Appendix 5.1 “Explanation on PAGE MODE”
ESC L, ESC W
To Next Page
Loading...
