Citizen CT-E351 - Page 212

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 211 -
CT-S281
• Setting MSW 4 (a=4)
n
b (Set Value)
Function
1
48 (Default)
At the selection of Black mark/Label paper, enables auto
end-measurement.
49
At the selection of Black mark/Label paper, disables auto
end-measurement.
2
48 (Default)
Finding top of form at power ON disabled.
49
Finding top of form at power ON enabled.
3
48 (Default)
Feed & Cut at TOF disabled.
49
Feed & Cut at TOF enabled.
4
48 (Default)
Uses thermal roll paper.
49
Uses Black mark paper/ label paper.
5
48 (Default)
Detects paper position and black mark.
49
Detects paper position and inter-label distance.
6
48 (Default)
Paper type selection disabled
49
Paper type selection enabled
7
48 (Default)
Label mode 1 - Auto paper type selection disabled
49
Label mode 2 – Auto paper type selection enabled
8
48
Cut method is determined according to the cut command.
49 (Default)
Partial cut is performed regardless of cut command. (full
but by command: enabled).
*** Default setting of MSW4-4 depends on the model. Thermal paper is the
default of the standard model.
*** MSW 4-5 is valid only when black mark/label is set. If MSW4-4 is set for
thermal paper, it is invalid
*** MSW4-8 is invalid when black mark/label is selected. Cut type for black
mark/label paper is only full cut.
• Setting MSW 5 (a=5)
n
b (Set Value)
Function
1
49 (Default)
Reserved
2
48 (Default)
Reserved
3
48
USB mode virtual serial.
49 (Default)
USB mode printer class.
4
48 (Default)
Reserved
5
48 (Default)
Reserved
6
48 (Default)
Reserved
7
48 (Default)
If PNE is released, Error LED is automatically turned off.
49
Error LED is not turned off until the paper is exchanged
(printer Cover is opened) even if PNE is released.
8
48 (Default)
Reserved
• Setting MSW 13 (a=13) (CT-S281BD model only
）
n
b (Set Value)
Function
1
48(Default)
Bluetooth security level “Low”
49
Bluetooth security level set by MSW13-2
2
48(Default)
Bluetooth security level “Middle”
49
Bluetooth security level “High”
3
48(Default)
Accept connection request from all devices
49
Accept connection request from paired device only
4
48(Default)
Reserved
5
48
Respond against Bluetooth device scan
49(Default)
Does not respond against Bluetooth device scan
6
48
Disable auto reconnection request function
49(Default)
Enable auto reconnection request function
7
48(Default)
Reserved
8
48(Default)
Reserved