Citizen CT-E351 - Page 214

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 213 -
CT-S300
• Setting MSW 4 (a=4)
n
b (Set Value)
Function
1
48 (Default)
At the selection of Black mark paper, disables auto
end-measurement.
49
At the selection of Black mark paper, enables auto
end-measurement.
2
48(Default)
At the selection of Black mark paper, sets sensor position
to be on the printing side.
49
At the selection of Black mark paper, sets sensor position
to be on the back of the printing side.
3
48 (Default)
Reserved
4
48 (Default)
Reserved
5
48 (Default)
Reserved
6 48 (Default) Reserved
7
48 (Default)
Reserved
8
48 (Default)
Forcible partial cut disabled.
49
Forcible partial cut enabled (full cut by command:
enabled).
* MSW 4-1, -2 are valid when MSW 3-4 is ON.