Citizen CT-E351 - Page 216

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 215 -
CT-S310
• Setting MSW 4 (a=4)
n
b (Set Value)
Function
1
48 (Default)
At the selection of Black mark paper, disables auto
end-measurement.
49
At the selection of Black mark paper, enables auto
end-measurement.
2
48
At the selection of Black mark paper, sets sensor position
to be on the printing side.
49 (Default)
At the selection of Black mark paper, sets sensor position
to be on the back of the printing side.
3
48
Paper heading cut disabled.
49 (Default)
Paper heading cut enabled.
4
48 (Default)
Reserved
5
48 (Default)
Reserved
6
48 (Default)
Reserved
7
48 (Default)
Reserved
8
48
Forcible partial cut disabled.
49 (Default)
Forcible partial cut enabled (full but by command:
enabled).
* MSW 4-1, MSW4-2 are valid when MSW 3-4 is ON.
• Setting MSW 5 (a=5)
n
b (Set Value)
Function
1
48 (Default)
Buzzer sound enabled.
49
Buzzer sound disabled.
2
48 (Default)
Reserved
3
48
USB mode virtual serial.
49 (Default)
USB mode printer class.
4
48 (Default)
Reserved
5 48 (Default) Reserved
6
48 (Default)
Reserved
7
48 (Default)
If PNE is released, Error LED is automatically turned off.
49
Error LED is not turned off until the paper is exchanged
(printer cover is opened) even if PNE is released.
8
48 (Default)
Reserved