Citizen CT-E351 - Page 220

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 219 -
CT-S2000
• Setting MSW 4 (a=4) (Black mark/Label model)
n
b (Set Value)
Function
1
48 (Default)
At the selection of Black mark/Label paper, enables auto
end-measurement.
49
At the selection of Black mark/Label paper, disables auto
end-measurement.
2
48 (Default)
Finding top of form at power ON disabled.
49
Finding top of form at power ON enabled.
3
48
Feed & Cut at TOF disabled.
49 (Default)
Feed & Cut at TOF enabled.
4
48 (Default)
Uses thermal roll paper.
49
Uses Black mark paper/ label paper.
5
48 (Default)
Detects paper position and black mark.
49
Detects paper position and inter-label distance.
6
48 (Default)
Paper type selection disabled
49
Paper type selection enabled
7
48 (Default)
Reserved
8
48
Cut method is determined according to the cut command.
49 (Default)
Partial cut is performed regardless of cut command. (full
but by command: enabled).
* MSW 4-5 is valid only if black mark/label is set. If MSW4-4 is set for
thermal paper, it is invalid
* MSW4-8 is invalid when black mark/label is selected. Cut type for black
mark/label paper is only full cut.
• Setting MSW 5 (a=5)
n
b (Set Value)
Function
1
48 (Default)
Buzzer sound enabled.
49
Buzzer sound disabled.
2
48 (Default)
Basic calculation pitch (180 dpi / 360 dpi).
49
Basic calculation pitch (203 dpi / 406 dpi).
3
48
USB mode virtual serial.
49 (Default)
USB mode printer class.
4
48 (Default)
Reserved
5
48 (Default)
Reserved
6
48 (Default)
High quality printing mode disabled
49
High quality printing mode enabled
7
48 (Default)
Reserved
8
48 (Default)
Reserved