Citizen CT-E351 - Page 262

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 261 -
CT-S801(II)/CT-S851(II)
• a=116: Sets the paper specified by (nL+nH×256).
(nL+nH×256)
Paper
1(Default)
Specified single color paper.
257
Recommended 2-color
paper5
• a＝151: Sets the Bluetooth Security/Connect Device specified
by (nL+nH×256). [CT-S801II, CT-S851II]
(nL+nH×256)
Security / Connect Device
1(Default)
Low / All
2
Middle / All
3
Middle / Paired
4
High / All
5
High / Paired
• a＝155: Sets the Bluetooth device scan specified by (nL+nH×256).
[CT-S801II, CT-S851II]
(nL+nH×256)
BT Device Scan
1
No Response
2(Default)
Discoverable
• a＝156: Sets the Bluetooth Auto Reconnect request specified
by (nL+nH×256). [CT-S801II, CT-S851II]
(nL+nH×256)
Auto Reconnect
1
Invalid
2(Default)
Valid
• a=201: Outputs ACK to the position specified by (nL+nH×256).
(nL+nH×256)
ACK Output Position
1(Default)
ACK-in-Busy
2
ACK-while-Busy
3
ACK-after-Busy
• a=202: Controls input buffer full Busy with the value selected by
(nL+nH×256) and controls Busy with output/cancel timing
(remaining capacity).
(nL+nH×256)
When Input Buffer
Capacity “Small” is Set
When Input Buffer
Capacity 4K Bytes (Large)
is Set
Output Cancel Output Cancel
1(Default)
16
26
128
256
2
16
40
128
512
3
30
50
72
256
4
30
60
72
512
• XON/XOFF is also output by the establishment of conditions.
• Ignores the data received when input buffer idle capacity is 0.
• a=212: Selects DMA (Direct Memory Access) control of serial
communication specified by (nL+nH×256).
(nL+nH×256)
DMA control
1
Invalid
2(Default)
Valid