Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
- 270 -
CT-S601(II)/CT-S651(II)
• a=213: Selects the flow control specified by (nL+nH×256) when virtual
COM is set.
• a=216: Select the Kanji Code specified by (nL+nH×256)
)
)
• a=217: Select the international character set specified by (nL+nH×256)
• a=218: Select the codepage specified by (nL+nH×256)
7
8
9
• a=240: Sets the buzzer sound specified by (nL+nH×256)
• a=241: Sets the max number of 1 head division specified by (nL+nH×256)
Max dot in 1 head division