Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
- 312 -
CT-S2000
• a=116: When kind of paper is specified
Stored
Paper
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
• a=201: When ACK output position is specified
Stored
ACK Output
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
• a=202: Input buffer full Busy output/cancel timing
Stored
BUSY
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
• a=212: When DMA (Direct Memory Access) control of serial communication is specified
Stored
DMA control 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
• a=213: When the flow control of virtual COM is specified.
Stored
Flow control 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
• a=214: When Kanji is specified
Stored
Kanji 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
• a=220: When maximum black mark width is specified
Stored
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
・
・
・
・
・
・
・
・
・
・
・
・
・
・
• a=221: When maximum black mark page length is specified
Stored
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
・
・
・
・
・
・
・
・
・
・
・
・
・
・