Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
- 403 -
CT-S801/CT-S851/CT-S601/CT-S651
1, 49 Model ID
CT-S801/851 5DH
Refer to table “Type ID” below
4, 52
Depends on Black mark paper/
Label paper (mm)
• Type ID If n=2, 50 is specified:
Equipped for 2 byte code support
Equipped with auto cutter
2
Black mark paper/ Label paper
(when Black mark paper/ Label paper is selected)
04H 4
n = 4, 52 specified (only for B.M/Label specs)
The Black mark length/label gap length and mark interval/label length
currently used are returned in 4-byte code. All fractional parts in
millimeters are rounded off.
Byte 1 + Byte 2 x256 = Black mark interval
Byte 3 + Byte 4 x256 = Black mark length mm
Black mark paper/Label paper
• Printer information configuration on and after transmitted n=65 is shown below.
n
Kind of Printer
Information
Information
Differs by firmware version.
67 Model name
69
Kinds of multi-language
fonts
Japanese Kanji specifications: KANJI
KANJI JAPANESE
Hangul specification: KOREA
Chinese specifications: CHINA
112 State of DSW
Refer to table “DSW” below
(only serial model)
• Sends printer information specified by n=65 or more.
Subject to item to be responded
• DSW If n=112 is specified:
0
1
2
3
*only serial model