Citrix ADC MPX
Rack precautions:
• Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor, with the
full weight of the rack resting on them.
• For a single‑rack installation, attach a stabilizer to the rack.
• For a multiple‑rack installation, couple (attach) the racks together.
• Always ensure that the rack is stable before extending a component from the rack.
• Extend only one component at a time. Extending two or more simultaneously might cause the
rack to become unstable.
• The handles on the le and right of the front panel of the appliance must be used only for ex‑
tending the appliance out of the rack. Do not use these handles for mounting the appliance on
the rack. Use the rack‑rail hardware, described later, instead.
Taiwan BSMI RoHS statement
September 19, 2022
The following tables are a declaration of the presence condition of restricted substances in Citrix ADC
MPX and SDX hardware appliances.
© 1999–2023 Cloud Soware Group, Inc. All rights reserved. 130
To Next Page
Loading...
