Citrix ADC MPX
Enable RADIUS authentication in the LOM GUI
September 19, 2022
RADIUS (Remote Authentication Dial‑In User Service) is a network protocol that allows you to manage
remote user authentication, authorization, and auditing.
Configure RADIUS authentication in the LOM GUI
1. Log on to the LOM GUI.
2. Navigate to Configuration > Radius.
3. Select Enable RADIUS.
4. Specify the port and IP address of the RADIUS server.
5. Specify the secret (password) for the user to access the RADIUS server.
6. Click Save.
Parameters:
RADIUS username and password:
The RADIUS server determines the supported characters and lengths. BMC does not limit or filter any
character.
On the MPX 8000/8600, MPX 14000, and MPX 25000 series platforms, BMC password length support: 1
character minimum, 16 character maximum.
On the MPX 8900, MPX 15000, and MPX 26000 series platforms, BMC password length: 1 character
minimum, 64 character maximum.
RADIUS secret:
BMC valid characters are 0 – 9, a-z, A-Z,! @, +, -, /,: and _.
© 1999–2023 Cloud Soware Group, Inc. All rights reserved. 176
To Next Page
Loading...
