Citrix ADC MPX User Manual

Citrix ADC MPX
Perform a warm restart remotely from another computer on the network
ipmitool –U <bmc_gui_username> –P <bmc_gui_password> –H <bmc IP address> mc
reset cold
Perform a core dump
If the appliance fails or becomes unresponsive, you can remotely perform a core dump. This proce‑
dure has the same eect as pressing the NMI button on the back panel of the appliance.
Perform a core dump by using the GUI
1. In the Menu bar, click Remote Control.
2. Under Options, click NMI, and then click Initiate NMI.
Perform a core dump remotely from another computer on the network by using the shell
At the shell prompt, type:
ipmitool -U <bmc_gui_username> -P <bmc_gui_password> -H <bmc IP address>
chassis power diag
Restore the BMC configuration to factory defaults
September 19, 2022
You can restore the BMC to its factory‑default settings, including deleting the SSL Certificate and SSL
key.
Reset the configuration to factory defaults by using the GUI
1. Navigate to Maintenance > Factory Default.
2. Click Restore.
Reset the configuration to factory defaults by using the shell
At the shell prompt, type:
ipmitool raw 0x30 0x40
© 1999–2023 Cloud Soware Group, Inc. All rights reserved. 173

Citrix ADC MPX Specifications

General

Category	Network Hardware
Type	Application Delivery Controller
Virtualization Support	Yes
Power Supply	Redundant power supplies
High Availability	Yes
Product Series	Citrix ADC
Model	MPX
Ports	Varies by model
Redundancy	Yes
Protocols Supported	HTTP, HTTPS, TCP, SSL, DNS
Security Features	DDoS protection
Operating System	Citrix ADC