Citrix ADC MPX - Page 213

Citrix ADC MPX
6. Type fsck_ufs -y /dev/ad0s1a to verify the disk consistency of the /flash partition:
7. Type df to display the currently mounted partitions.
8. If the device name s1a is not mounted, type /sbin/mount /dev/ad0s1a /flash to mount
the disk name s1a on the /flash partition. Type df to display the updated partitions.
9. Type fsck_ufs -y /dev/ad0s1e to verify the disk consistency of the /var partition.
10. If the device name s1e is not mounted, type /sbin/mount /dev/ad0s1e /var to mount the
disk drive on the /var partition. Type df to display the mounted partitions.
If the output does not appear to be normal or an erroris displayed, reset the hard disk drive, and repeat
© 1999–2023 Cloud Soware Group, Inc. All rights reserved. 213