ENGINE
111
CHECKING AND SETTING THE VALVE TIMING
Engines : WJZ - WJY
SETTING THE VALVE TIMING (Continued).
Rotate the crankshaft by 8 turns (direction of rotation).
Peg :
- The hub (1), using tool [1].
- The pinion (2), using tool [2].
- The flywheel, using the tool [3].
Loosen :
- The screws (4) and (5).
- The roller (9).
- Retighten screws (4) and (5) by hand.
- Fit the tool [7] to the belt strap at "a".
- Turn the roller (9) (anti-clockwise direction) using tool [6], to obtain : 42 ± 2 SEEM
units.
B1EP134C
B1CP045C
B1EP133C
To Next Page
Loading...
