236
AXLES
SUSPENSION
STEERING
POWER-ASSISTED STEERING SPECIFICATIONS
XSARA - All Types
Power-assisted steering assembly
Tightening torques (m.daN)
High pressure tube (Rubber seal pump side)
- Power-assisted valve and pump union : 2.5
Return pipe.
- Power-assisted valve union : 2.5
(16) - Upper front fixing (E3) : 2.5
(17) - Upper rear fixing (E3) : 2.2
(18) - Fixing (E3) : 2.2
Tightening sequence.
- Tighten screws (16) and (18)
- Lightly tighten screw (17), then fully tighten.
Pressure switch on the pressure circuit.
- Switch opens 30 to 35 Bars.
- Switch closes 25 bars.
- Tighten to : 2 m.daN.
Power-assisted steering system capacity = 1 litre.
Oil type: TOTAL FLUIDE ATX.
SAGINAW Pump adjustment = 100 Bars ± 5.
Pump shaft threading 3/8 - 16 threads per inch.
B3EP045D
To Next Page
Loading...
