191
CLUTCH
GEARBOX
DRIVESHAFTS
RECOMMENDATIONS – PRECAUTIONS (AUTOMATIC GEARBOX - MB3)
Engine : KFW
PRE-REPAIR PROCEDURE
Oil quality
If the gearbox has suffered a serious fault resulting in a malfunction or the destruction of a clutch, the
oil will overheat and become contaminated with impurities : the oil is said to be "burnt".
This is characterised by a black colour and the presence of an unpleasant smell.
ESSENTIAL
: The gearbox must be replaced.
Oil level (prior conditions)
- Oil hot (80°C min.).
- Foot on the brake, change through all the gears.
- Vehicle on a level surface.
- Selection lever in position "P".
- Engine running.
The level should be between the min. markings "A" and "B" on the dipstick.
ESSENTIAL
: In no case should the oil level exceed the marking "B".
Top up the automatic gearbox oil level (if necessary).
B2CP16WC
SAXO
To Next Page
Loading...
