114
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engines : RHY - RHZ
SETTING THE VALVE TIMING.
Peg :
- The engine flywheel, tool [3].
-The camshaft, tool [5].
Loosen :
- The three screws (9).
- The screw (7) of the tensioner roller (6).
Remove the timing belt.
Checks.
IMPERATIVE : Just before refitting, carry out the checks below :
Check that :
- The rollers (6), (11) and the water pump (10) turn freely (without play or tightness).
- There are no traces of oil (on camshaft or crankshaft).
B1EP13DD
To Next Page
Loading...
