164
INJECTION
CHECKING AND SETTING THE BOSCH MECHANICAL INJECTION PUMP
ADJUSTING THE ACCELERATOR CONTROL.
- Fully depress the accelerator pedal.
- Check that the lever (10) is against the stop screw (6). If not, modify the
position of the spring clip (7).
- Check that, at idle, the lever (10) is against its stop (9).
Preliminary conditions :
- Engine hot (The cooling fan is engaged twice).
- Fast idle control released.
ADJUSTING THE IDLE SPEED.
- Slacken the screw (9) by a few turns until it no longer touches the lever (10).
- Adjust the idling speed using the screw (8).
B1HP0HSD
Engine : VJX (continued)
SAXO - XSARA
To Next Page
Loading...
