246
AXLES
SUSPENSION
STEERING
STEERING SPECIFICATIONS
Tightening torques (m.daN)
(7) Pivot ball-joint nut 4 ± 0.4.
(8) Steering rod adjusting lock nut 4.5 ± 0.4.
(9) Ball-joint on steering rack 6 ± 0.6.
(10) Fixing steering on subframe 8 ± 0.8.
(11) Hydraulic pipe connection 2.4 ± 0.2
(12) Power steering valve 1.2 ± 0.2
(13) Plunger flange screws 1.2 ± 0.2.
(14) Steering ram screw on housing 9 ± 1.
(15) Steering ram screw on yoke 9 ± 1.
NOTE : When removing the steering, it is imperative to replace screws
(14) and (15) (New screws).
B3EP117D
XSARA PICASSO - All Types
To Next Page
Loading...
