254
BRAKES
SAXO - All Types
BRAKES (continued)
EVOLUTION : Fixing screws for REAR brake calipers: Type BENDIX STANDARD 4.
Application from RPO 8973.
Vehicles concerned.
Vehicles equipped with non-ventilated brake discs. (Except VTS trim level).
Vehicles equipped with the following engines:
TU5J4 and TU5JP.
Evolutions.
Evolutions of the following components:
Rear brake caliper fixing screws.
Stop plates for rear brake caliper fixing screws.
Evolutions of the fixing screws:
Coating on the threads of the fixing screws.
Flanges for better centring of the fixing screws.
NOTE : The fixing screws are matched to the stop plates.
IMPERATIVE : Respect the tightening torques.
Old fitting: tighten to 11 m.daN ± 1 ( up to RPO 8972).
NEW FITTING (from RPO 8973).
Tightening : 7.5 m.daN ± 0.7
Repair.
Removing-refitting the rear brake caliper (old and new fitting)
Clean the threads of the fixing screws and coat them with a brake product
of type «E3».
Tightening : 7.5 m.daN ± 0.7
Interchangeability
The new fixing screws matched to the new stop plates can be fitted on the
old rear brake calipers.
IMPERATIVE : Respect the matching of the stop plates and fixing
screws.
Replacement parts.
The Replacement Parts service markets both the old and the new com-
ponents.
To Next Page
Loading...
