42
Monitoring
C4-Picasso-II_en_Chap01_controle-de-marche_ed01-2014
Service indicator zero reset
Followingthisoperation,ifyouwishto
disconnectthebattery,lockthevehicle
andwaitatleastfiveminutesforthe
zeroresettoberegistered.
Aftereachservice,theserviceindicatormust
beresettozero.
Ifyouhavecarriedouttheserviceonyour
vehicleyourself:
F switchofftheignition,
F pressandholdthetripdistancerecorder
zero reset button,
F switchontheignition;thedistancerecorder
displaybeginsacountdown,
F whenthedisplayindicates"=0", release
thebutton;thespannerdisappears.
Retrieving the service
information
Youcanaccesstheserviceinformationatany
time.
F Pressthetripdistancerecorderzeroreset
button.
 Theserviceinformationisdisplayedfora
fewseconds,thendisappears.
To Next Page
Loading...
Need help?
General
