CITROEN C1 - Page 78

72
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine : 8HT
Remove :
- the screw (12)
- the accessories drive pulley (14)
Refit the screw (12).
Remove the peg [1].
Disconnect the connector at "h".
Slacken the screws (13).
Remove the lower timing cover (11).
IMPERATIVE : The magnetic track "j" of the crankshaft pinion should show no signs of
damage and should not be approached by any other source of magnetism.
Remove :
- the engine speed sensor (16)
- the belt retaining stop (15)
B1E2000D
B1E2004D
FR-C1-page022-92-2005 9/01/06 8:49 Page 72