74
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine : 8HT
NOTE : The engine has to be lowered by 3 cm so that you can position the crankshaft by means of
the peg.
Rotate the engine by means of the crankshaft pinion screw (12) clockwise, to bring it to the pegging
position.
Position :
- the camshaft pinion, using the peg [2]
- the fuel high pressure pump, using the peg [3]
- the crankshaft pinion, using the peg [3]
Hold the tensioner roller in place, by means of a hexagonal spanner at "k".
Slacken the screw (21).
Detension the timing belt by pivoting the tensioner roller clockwise at "k".
Remove the timing belt.
B1E2006D
To Next Page
Loading...
