AXLES
SUSPENSION
STEERING
135
Front pivot.
Front pivot fixed on the pivot support by means of an upper balljoint and a lower balljoint.
Front hub bearing:
- Diameter 83 mm.
- Bearing with double row of balls, with an integral magnetic wheel (48 pairs of poles).
Suspension leg:
- Front axle with wheels independent, of multi-arm type.
- Travel stop: height 60 mm.
- Anti-roll bar
Anti-roll bar
Engines Diameter (mm) Colour ref.
ES9A 23,5 mm Yellow
DT17BTED4 24 mm Pink
NOTE: The geometry specifications are given with the values for checking and adjusting the
axle geometries.
B3CP09CC
FRONT AXLE
To Next Page
Loading...
