155
AXLES
SUSPENSION
STEERING
Tools.
[1] Pliers for clic clips : 4121-T
[2] LEXIA diagnostic tool : 4171-T
[3] PROXIA diagnostic tool : 4165-T
Draining.
Start the engine.
Place the vehicle in the low position.
Stop the engine.
Raise and support the vehicle, wheels hanging.
WARNING: The LDS fluid reservoir is pressurised.
Open the cap of the LDS fluid reservoir.
Remove:
- The front RH wheel.
- The front RH splash-shield.
Remove the clip (1) using tool [1].
Uncouple the hose (2) from the LDS fluid reservoir.
Drain the LDS fluid reservoir.
IMPERATIVE: Any LDS fluid recovered must not be re-used.
B3FP7HED
DRAINING, FILLING AND BLEEDING THE HYDRAULIC SUSPENSION/STEERING CIRCUIT
To Next Page
Loading...
