88
INJECTION
BOSCH ME 7.4.7 INJECTION SYSTEM
Engine: ES9A
Electrical circuit
Component Location Supplier Reference Observations
Inlet air temperature sensor 27 JAEGER 402 084 01
2-way grey connector
Fixing: on the air filter inlet duct
Camshaft position
13 ELECTRICFIL
14 43 2514 43
3-way grey connector
sensor
25
Fixing: on the inlet camshaft bearing cap cover
3-way green connector
Knock sensor 23 BOSCH 0 261 231 10 Fixing: on the central part of the «V» of the engine block
Essential to respect tightening torque: 2 ± 0,5 m.daN
DAV 402 243 03
2-way green connector
Engine coolant temperature 22
Fixing: on the coolant outlet housing
sensor
14 43 32
Tightening torque:
ELECTRICFIL
Tighten to: 2 ± 0,2 m.daN
Engine speed sensor 12 14 43 28
2-way black connector
Fixing: on the gearbox clutch housing
To Next Page
Loading...
