87
INJECTION
BOSCH ME 7.4.7 INJECTION SYSTEM
Engine: ES9A
Air circuit
Component Location Supplier Reference Observations
Integrated pressure sensor 25
DS-S2 0 3-way grey connector
261 260 140 Integrated in the inlet manifold
Motorised butterfly housing 14
DVE5 6-way black connector
BOSCH 0 280 750 041 Fixing, on the inlet manifold
Accelerator pedal
14 43 33 6-way black connector
position sensor
26 Supply, 5 volts
Fixing, on the accelerator
Electrical circuit
ME 7.4.7. 128-way connector
Ignition injection
29 BOSCH
0 261 B00 736 Sequential injection
ECU "Flash" type Eprom (reprogrammable eprom)
Installation, in the electronic ECU compartment
280 911 2-way blue connector
Opening of contact at 20 bars
Power steering pressure For ECU information
sensor 24 BITRON (steering on full lock)
Marking mauve ring seal
Fixing : on the power steering high pressure
pump outlet pipe
To Next Page
Loading...
