CITROEN C6 2005 - Hydraulic Suspension System; Active Suspension: Safety Requirements

189
BRAKES
ELECTRIC PARKING BRAKE CABLES
Manual unlocking cable end.
NOTE: Grease the cable worm (6).
Engage the parking brake cable (6) into the electric parking brake system.
Do up 3 turns anti-clockwise at "b".
NOTE: Align the pin "g" with the notch "f".
Do up the nut (3).
Tighten the nut (3) to : 0,6 ± 0,1 m.daN.
Refit the electric parking brake system (see corresponding operation).
Reconnect the battery.
Apply and release the electric parking brake.
Check the functioning of the electric parking brake.
IMPERATIVE: Perform the operations that are necessary following a reconnection of the
battery (see corresponding operation).
B3FP7JOD
B3FP7J3D
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 189