140
AXLES
SUSPENSION
STEERING
(1) Rear axle crossmember
(2) Rear axle crossmember rear rubber bush
(3) Rear axle crossmember front rubber bush
(4) Suspension longitudinal arm
NOTE: Rear axle in cast aluminium alloy, of multi-arm type.
(5) Suspension upper arm
(6) Rear pivot
(7) Hub-bearing
(8) Tracking adjustment rod
(9) Suspension lower arm
Hub-bearing:
- The rear hub-bearing is equipped with an ABS radial target (48 pairs of poles).
Stub axle:
- Diameter 32 mm.
- The stub axle, joined onto the rear pivot, is not separable.
IMPERATIVE: The rear hub-bearing must not be placed in proximity to a source of
magnetism or of pollution by metal particles. Components must be clean and free from
any signs of abnormal wear or damage.
B3DP0BYD
B3DP0BZD
REAR AXLE
Rear axle
Rear pivot
To Next Page
Loading...
