SAFETY REQUIREMENTS: ACTIVE SUSPENSION WITH VARIABLE DAMPING
All operations on the hydraulic suspension circuit must be performed in conformity with the following requirements and regulations:
Authorities competent in matters of health:
- Accident prevention.
- Environmental protection.
WARNING: Operations should be carried out by specialised personnel who have had training in the safety requirements and precautions to
be taken.
Safety requirements.
ESSENTIAL: In view of the special features of the hydraulic suspension system, observe the requirements below, before undertaking any
repair.
IMPERATIVE: Depending on the operation to be carried out, respect the requirements for supporting and securing the vehicle.
Wheels hanging Wheels not hanging
Vehicle on the ground Vehicle on 4-column lift
2-column lift or secure the Depressurisation of the circuit Checking and adjusting of Other operations
vehicle on 4 axle stands (see corresponding operation) heights (switch on ignition) (depressurisation of the
hydraulic circuit)
HYDRAULICS
195
To Next Page
Loading...
