CITROEN C6 2005 - Page 168

162
AXLES
SUSPENSION
STEERING
Setting the steering rack mid-point.
IMPERATIVE: Respect the precautions to be taken prior to any operation (refer to the
brochure "Recommendations-precautions").
Preliminary operation.
Raise and support the vehicle on 2-column lift.
Remove (on the RH side):
- The clip (1).
- The clip (2).
Detach the steering rack protection gaiter.
Setting.
Turn the steering wheel to full LH lock.
Measure the dimension X.
Turn the steering wheel to full RH lock.
Measure the dimension Y.
Calculate the dimension L = (Y - X) : 2.
Position the steering rack to the dimension "L" (mid point of the steering rack).
Additional operation.
Refit:
- The protection gaiter.
- The clip (2).
- The clip (1) (new).
B3EP13UC
B3EP13VD
POWER STEERING SPECIFICATIONS
Angl-C6-page121-169-2005 4/02/05 17:31 Page 162