172
BRAKES
B3FP7GFC
BRAKING SYSTEM: GENERAL SPECIFICATIONS
Components Supplier Reference Observations
Hydraulic valve block
Located on the front LH chassis member:
TRW
ESP 4 regulation channels
ECU
VSC 440
25-way connector
Integral to the hydraulic valve block
2-way black connector
Front wheel sensor The sensors, of inductive type, are fitted on the pivot
SIEMENS Air gap non-adjustable: 0.25 to 1.65 mm
VDO 2-way black connector
Rear wheel sensor The sensors, of inductive type, are fitted on the pivot
Air gap non-adjustable: 0.23 to 1.35 mm
Front pivot bearing
The hub has a bearing with integral magnetic wheel
NSK
(48 pairs of poles)
Rear hub bearing
The rear hub-bearing has a radial ABS target
(48 pairs of poles)
ABS/ESP hydraulic valve block
To Next Page
Loading...
