200
HYDRAULICS
SUSPENSION SPHERES: SPECIFICATION - IDENTIFICATION
Stiffness regulator accumulators (front).
NOTE: The dampers are integral to the hydractive regulator.
Engine version Suspension sphere marking Pressure rating (bars)
ES9A
KR 70
DT17BTED4
Stiffness regulator accumulators (rear).
NOTE: The dampers are integral to the hydractive regulator.
Engine version Suspension sphere marking Pressure rating (bars)
ES9A
KS 40
DT17BTED4
The suspension cylinders on the same axle have to be equipped with the same type of suspension accumulators.
IMPORTANT: Tightening torque for the suspension accumulators : 2,7 ± 0,5 m.daN.
To Next Page
Loading...
