47
ENGINE
B1BP27EC
AUXILIARY EQUIPMENT DRIVE BELT
Engine: ES9A
Tools.
[1] Ratchet spanner S.171 FACOM (1/2 square) : S 171
[2] Reduction box S.230 FACOM (1/2 - 3/8) : S 230
Removing.
Remove the engine cover.
Pivot the tensioner roller bracket (1) clockwise, until it locks,
using tools [1] and [2] at «a».
Remove the auxiliary equipment drive belt.
ESSENTIAL: Check that the guide rollers are turning freely
(no play and no tightness).
Refitting.
Refit the auxiliary equipment drive belt.
Respect the following order of assembly:
- The crankshaft pulley (2).
- The tensioner roller (3).
Release the tensioner roller bracket (1), by turning it anti-clockwise,
using tools [1] and [2].
ESSENTIAL: Make sure that the belt is correctly positioned in
the grooves of the various pulleys.
B1BP27FC
To Next Page
Loading...
