58
ENGINE
CHECKING THE VALVE TIMING
Engine: DT17BTED4
Tools.
[1] Set of plugs : (-).0188-T
[2] Flywheel setting peg (double flywheel) : (-).0195.K Toolkit 0188-T
[3] Camshaft setting pegs : (-).0195.H Toolkit 0188-T
Checks.
IMPERATIVE: Respect the safety and cleanliness requirements specific to High pressure
Diesel injection (HDi) engines.
Remove the engine cover.
Disconnect the battery negative terminal.
Raise and support the front of the vehicle.
Remove:
- The under-engine sound-deadening.
- The front RH wheel.
- The front RH splash-shield (see corresponding operation).
Remove:
- The air duct between the air/air exchanger and the air inlet housing (4).
- The air inlet housing (4).
Uncouple, plug and move aside the pipes (2) and (3), using tools [1].
Unclip and move aside the electrical harness.
Remove the venting chamber fixing (1).
Move aside the venting chamber (1).
B1BP3BXD
To Next Page
Loading...
