81
ENGINE
DRAINING, FILLING AND BLEEDING THE ENGINE COOLING CIRCUIT
Tools.
[1] Filling cylinder : 4520-T
[2] Adaptor for filling cylinder : 4222-T
[3] Control rod for filling cylinder : 4370-T
IMPERATIVE: Respect the safety and cleanliness requirements.
The draining and refilling operations can be carried out using coolant fluid replacement equipment.
It is essential to follow the instructions as stated for that equipment.
Draining.
Remove the header tank cap.
Open the bleed screw of the engine cooling radiator, located under the radiator on the LH side.
Remove the drain screw (1).
Drain the cylinder block.
Engine: DT17BTED4
B1GP0CNC
To Next Page
Loading...
