Clarion FZ409 User Manual

29
English
FZ409
3 - 5 .
During finish adjustment, touch
[
ENT
]
key for
2 seconds to confirm.
3 - 6 .
If successfully delete the registered code,
“DELETED” will be displayed for 2 seconds
and back to 1
st
item.
When code is registered
3 - 3 .
Slide along
[ ]
slider or touch
[ ]
/
[ ]
key to input the registered code.
3 - 4 .
Touch
[ ]
/
[
]
key to set the previous or
next digit.
Note:
White down your personal code in case you forget
it.
3 - 6 .
“MEMORY XXXX” will be displayed for 2 sec-
onds where “XXXX” is the entered digits.
Common Operations
3 - 7 .
If unsuccessfully delete the registered code,
“FAILED” will be displayed for 2 seconds and
back to the “INPUT 0000” display.
Turning the screen saver function on
or off
This unit is provided with the screen saver func-
tion which allows you to show various kinds of
patterns in the operation status indication area
of the display in a random order. You can turn
on or off this function. If the button operation is
performed with the screen saver function on, the
operation display corresponding to the button op-
eration is shown for about 30 seconds and the
display returns to the screen saver display.
∗
The factory default setting is “ON”.
3 - 1 .
Select “SCREEN SAVER”.
3 - 2 .
Touch
[ ]
key to enter detail setting stage.
3 - 3 .
Slide along
[ ]
slider or touch
[ ]
/
[ ]
key to select “ON” or “OFF”.
Setting the method for title scroll
Set how to scroll in MP3/WMA/AAC title.
∗
The factory default setting is “ON”.
3 - 1 .
Select “AUTO SCROLL”.
3 - 2 .
Touch
[ ]
key to enter detail setting stage.
3 - 3 .
Slide along
[ ]
slider or touch
[ ]
/
[ ]
key to select “ON” or “OFF”.
Setting the scroll speed
This function allows you to adjust the speed of
the title scroll.
∗
The factory default setting is “3”.
3 - 1 .
Select “SCROLL SPEED”.
3 - 2 .
Touch
[ ]
key to enter detail setting stage.
3 - 3 .
Slide along
[ ]
slider or touch
[ ]
/
[ ]
key to adjust the speed value.
(
Parameter
range: 1~5
)
OFF
To scroll just 1 time.
ON
To scroll automatically.
Setting the dimmer control
You can set the dimmer control “ON” or “OFF”.
∗
The factory default setting is “ON”.
3 - 1 .
Select “DIMMER”.
3 - 2 .
Touch
[ ]
key to enter detail setting stage.
3 - 3 .
Touch the
[ ]
/
[ ]
key to select “ON” or
“OFF”.

Clarion FZ409 Specifications

General

Brand	Clarion
Model	FZ409
Category	Car Receiver
Language	English