EasyManuals Logo

Clarion NX605 User Manual

Clarion NX605
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
NX605 31
English
Pressing
NAVI AV
during a telephone call
switches the screen as follows. With this
screen displayed as it is, operations such
as searching for a destination can be
performed.
Map screen during a telephone call
The call time, name of
other party or telephone
number is displayed.
The call is disconnected and the
current position is displayed.
This switches to telephone calls on the
cellphone unit.
This toggles the telephone control bar
between display and hide.
If you use the call waiting service, the
following screen is displayed when you
receive an incoming call from a third party
during a telephone call.
Screen during a telephone call
(the second incoming call waiting)
:
This ignores the call from a third party
and continues the call from the first
incoming call.
:
Every time you touch, this switches the
call between the first incoming call and
the second incoming call.
The other call is put on hold.
:
This ends the current call, and answers
the second incoming call.
Notice
•
and areoperatableonthemap
screenduringatelephonecall.
MEMO:
•Withsomecellphonemodels,incoming
callsareautomaticallyrejectedwhen
thereisanincomingcallfromathirdparty
duringatelephonecall.Theincomingcall
logisnotsaved.
4
To end a telephone call
This disconnects the call and returns
you to the screen before you made
the call.
The telephone number you called,
name (when registered to the
phonebook) and dial date/time are
saved as the outgoing call log. Only
the latest call log is shown for the
same phone numbers.
Making calls from the
outgoing/incoming call log
Notice
•Youcannotmakecallsfromtheincoming
calllogwhentheincomingcallwasfroma
withheldnumber.
1
MENU
Phone
2
3
or
4
Select the other party you want
to dial.
5
Call
The registered telephone number is
dialed and the call is made.
MEMO:
•Thelasttencallsrecordedontheunitare
displayedintheincoming/outgoingcall
log.
•Inthecaseoftelephonenumbers
registeredtothephonebook,the
registerednamesaredisplayed.
•Whenthevehiclemovesoutsidethe
cellphoneserviceareaduringatelephone
call(i.e.toanareawhereradiowaves
cannotbereceived),thelinewillbe
disconnected.
•Duringhandsfreetelephonecalls,the
audiosourcecannotbeswitchedor
selected.
•Itmaynotbepossibletomakeorreceive
callsunlessthecellphoneisinstandby.
Entering a number to make a
call
Attention
•Whileyouaredriving,youcannotenter
telephonenumberstomakeacall.Always
stopatasafelocationbeforemakinga
telephonecall.
Notice
•Alwaysinputtheareacodewhencallinga
land-linephone.
•Withsomecellphones,youmaynotbe
abletoredialimmediatelyafterhanging
upacallyoudialed.Waitawhilebefore
dialingthenumberagain.
1
MENU
Phone
2
Enter the telephone number.
3
The telephone number is dialed and
the other party is called.
:
The call is stopped if this is
touched while you are calling the
other party.

Table of Contents

Other manuals for Clarion NX605

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarion NX605 and is the answer not in the manual?

Clarion NX605 Specifications

General IconGeneral
BrandClarion
ModelNX605
CategoryGPS
LanguageEnglish

Related product manuals