30  NX500/NZ500
English
Owner’s Manual
This function is available when a Sirius Satellite 
Radio Receiver is connected through the 
dedicated connection. This unit requires the 
following receiver:
SIRIUS Satellite Radio Receiver: SC-C1
Note:
SIRIUS satellite radio is a subscription service. 
Please contact Sirius Radio to begin or alter 
your subscription:
• 
Internet: www.sirius.com
Telephone: 888-539-SIRIUS (747487)
Selecting a Satellite Radio mode
Press the [SIRIUS] button on Main Menu  
display. The system changes to the Sirius 
Satellite Radio mode. The Sirius mode screen is 
displayed.
Information Displayed During Reception
The following information is displayed when the 
satellite radio cannot be received normally.
• When the receiver is turned on the first time or 
  after a reset: “UPDATING” followed by a 
  percentage of completion.
• When a channel is being tuned in (no signal is 
  yet received): “ACQUIRING SIGNAL”
• A channel without a broadcast has been 
  selected: “INVALID CHANNEL”
• A channel not covered by your contract: 
  “CALL 888-539-SIRIUS”
  Call (888) 539-747487 to activate your radio.
• When a channel is out of air time: “OFF AIR”
• When the antenna is disconnected or has
  been damaged: “ANTENNA ERROR”
Confirming Your Radio ID
1. Touch the [    ] keyboard button on the  
    SIRIUS Menu display to display the keypad.
    Enter “0” and press “OK”. 
    Your SIRIUS ID (12-digit number) will be  
    displayed. 
2. Touch the [Settings] button on the SIRIUS  
    Menu display to enter Settings menu.
2. Press [SID] button. Your SIRIUS ID (12-digit  
    number) will be displayed.
Channel Selection
1. Touch the [Channels] button on the    
    SIRIUS Menu display to enter channel list  
    preview mode.
2. Select the channel  with the [       ] or [       ].
    Only channels that can be received are  
    selected. 
    Channels that are locked and channels not 
    covered by the contract will be skipped.
    The receiver seeks the next available channel 
    below or above the current channel.
Channel Selection with the channel number
1. Touch the direct access button on the  
    SIRIUS Menu display to enter direct channel  
    selection.
2. Enter the channel number of your desired 
    station by touching the [0] to [9] keys.
    If you enter a wrong number, you can cancel 
    it by touching the [BACK] key. 
Sirius Satellite Radio Operations
1 3
4 5 6 7 8
2
14 13 12 10 91115
1 -  Keyboard Button
2 -  Previous Channel 
  Button
3 -  Store Button
4 -  Next Channel Button
5 -  Scan Button
6 -  Previous Page
  Button
7 -  Next Page Button
8 -  EQ Button
9 -  Main Menu Button
10 - Clock Display
11 - Mute Display
12 - Satellite Signal
13 - Next Category Button
14 - Category Name
15 - Previous Category 
  Button
16 - Source Display
17 - Song Title
18 - Artist Information
19 - Album Information
20 - Scan Button