K
Kyle FieldsSep 3, 2025
What to do if my Clarion NZ503 Car Receiver video images are not displayed?
- MMichael AndersonSep 3, 2025
If video images are not displayed on your Clarion Car Receiver, check that the parking brake is engaged.
To Next PageTo Next PageWhat to do if my Clarion NZ503 Car Receiver video images are not displayed?
If video images are not displayed on your Clarion Car Receiver, check that the parking brake is engaged.
Why is the video of iPod/iPhone image disturbed on my Clarion Car Receiver?
If the video of your iPod/iPhone image is disturbed on your Clarion Car Receiver, the TV Signal setting of the iPod/ iPhone is not set correctly. Set the TV Signal setting (NTSC/ PAL) of the iPod/iPhone correctly.
What to do if my Clarion NZ503 Car Receiver disc cannot be loaded?
If your Clarion Car Receiver won't load a disc, it might be because a disc is already loaded. Eject the disc before loading a new one. Another reason could be foreign matter in the disc slot. Remove any foreign matter, or consult a service station.
What to do if nothing happens when I press buttons on my Clarion NZ503 Car Receiver?
If nothing happens when you press the buttons on your Clarion Car Receiver, and the display is not accurate, the microprocessor may have malfunctioned. Press the reset button with a thin rod to solve this. Note that when the reset button is pressed, the power will turn off, and frequencies of radio stations, titles, etc. stored in memory will be cleared.
Why does my Clarion NZ503 Car Receiver sound skip or is noisy?
If the sound skips or is noisy on your Clarion Car Receiver, the disc might be dirty. Clean it with a soft cloth. It could also be that the disc is heavily scratched or warped; if so, replace it with a disc in good condition.
What to do if my Clarion NZ503 USB device is not recognized?
If your Clarion Car Receiver doesn't recognize the USB device, disconnect it and reconnect it. If it's still not recognized, try a different USB device. It's possible the USB device is damaged. Also, check for loose connectors.
Why does my Clarion NZ503 Car Receiver not turn on?
Your Clarion Car Receiver might not be turning on because the fuse is blown. Replace it with a fuse of the same amperage. If it blows again, consult your store of purchase. Alternatively, there might be incorrect wiring. In this case, consult your installation center.
Why can't I pair my Bluetooth device with my Clarion Car Receiver?
If you cannot pair your Bluetooth enabled device with the Clarion Car Receiver, the device may not support the profiles required for the system. Try using another device to connect. Also, ensure the Bluetooth function of your device is enabled by referring to its user manual.
General| MP3 playback | Yes |
|---|---|
| CD-RW playback | - |
| Audio formats supported | MP3, MP4, WMA |
| Supported radio bands | AM, FM |
| Display type | LCD |
| Display diagonal | 7 \ |
| USB version | 2.0 |
| Bluetooth profiles | A2DP, AVRCP, DUN, HFP, HSP, OPP, PBAP |
| Line outputs (RCA) | 6 |
| USB ports quantity | 1 |
| Headphone connectivity | 3.5mm |
| Output power | 200 W |
| Product color | Black |
| Disc types supported | CD, DVD |
| Audio output channels | 4.0 channels |
| Maximum power per channel | 50 W |
