5.1
ch
Surround
Decoder Operations
.SPEAKER
GAIN
This function sets speaker output level.
*This function
is
not available for speakers whose
SPEAKER SEL setting
is
set
to
OFF.
3-1. Touch the [SPEAKER GAIN] key to show
the submenu.
3-2. Touch the [FRONT L], [CENTER], [FRONT
R], [SURROUND
R],
[SURROUND L] or
[SUB WOOFER] key to set respective item.
3-3. Touch the key to make adjustments
in
the
range
-10
dB to +10 dB
in
1 dB step
increments. The default value is "0
dB"
.
• DELAY
This function adjusts the timing of the speakers
so that they are synchronized with front speaker
output.
*This function
is
not available for speakers whose
"SPEAKER SEL" setting
is
set
to
OFF.
3-1. Touch the [DELAY] key to show the
submenu.
3-2. Touch the [CENTER SP] or [SURROUND
SP] key to set respective item.
[CENTER SP]:
Adjustments are made
in
the range 0 ms to
5 ms. The default value is "0 ms".
[SURROUND SP]:
Adjustments are made
in
the range 0 ms to
15 ms. The defaultvalue is "0 ms".
• DRC
This function sets the dynamic range
compression.
*This function
is
not available for speakers whose
"SPEAKER SEL" setting
is
set
to
OFF.
3-1. Touch the [DRC] key to show the submenu.
3-2. Touch the [MAX], [STD] or [MIN] key to
select respective item.
*The default value
is
[MAX].
4.
Touch the [RTN]
key,
[ESC]
key,
or press the
[ADJ] button.
58 VRX755VD
DSFmode
DSF
effect
ON/OFF
*
The factory default setting
is
"OFF".
1. Press the [ADJ] button and touch the
[AUDIO]
key.
2.
Touch the [STATUS]
key.
3.
Touch the [DSF] key to select "ON" and
"OFF".
4.
Each time the [DSF] key is touched, the on
and off statuses are switched alternately.
5.
Touch the [RTN]
key,
[ESC]
key,
or press the
[ADJ] button.
Note:
•
If
the
DSF
effect is
set
to OFG the adjustment
made
in "DSF" is
not
reflected in the music
source.
Selecting the DSFtype
1.
Press the [ADJ] button and touch the
[AUDIO] key.
2.
Touch
the
key
for the desirable type to select
it.
3.
Touch the [RTN]
key,
[ESC]
key,
or press the
[ADJ] button.
P.EQmode
P.EQ
effect
ON/OFF
*
The factory default setting
is
"OFF".
1.
Press the [ADJ] button and touch the
[AUDIO]
key.
2. Touch the [STATUS]
key.
3. Touch the [P.EQ] key to select "ON" and
"OFF".
4.
Each time the [P.EQ] key is touched, the on
and off statuses are switched alternately.
5. Touch the [RTN]
key,
[ESC]
key,
or press the
[ADJ] button.
Note:
•
If
the
REQ
effect is
set
to OFG the adjustment
made
in "P.EQ" is
not
reflected in the music
source.
To Next Page
Loading...
Need help?
General
