Clarion VRX8370R - Page 21

RDS Operations
TA (Traffic Announcement)
When the unit is in the TA standby mode, you
can listen to traffic announcements preferential-
ly when they start, irrespective of the function
mode.
You can also tune in to TP (Traffic Programme)
stations automatically.
To set the TA standby mode
lf you press the TA button [6] when only “TP” is
lit in the display, “TP” and “TA” light in the display
and the unit is set to the TA standby mode until
traffic announcements start.
When traffic announcements start, “TRA INFO”
appears in the display, and then PS (Programme
Service Name) appears.
FM1 BBC Re
SPORT
cT12:34
C23 C4) C2) C5
If you press the TA button [6] while traffic
announcements are being broadcast, they are
cancelled and the unit enters TA standby mode.
Cancelling the TA standby mode
If you press the TA button [6] when “TP” and “TA”
are lit in the display, “TA” in the display goes off
and the TA standby mode is cancelled.
Setting the auto tuning mode for TP stations
If you press the TA button [6] when only “TP” is lit
or “TP” and “TA” are not lit in the display, “TA” lights
and the unit automatically tunes in to TP stations.
Note:
e The unit continues to tune in automatically if no
TP station is received. Press the TA button [6]
again to stop auto tuning.
Auto store function for TP stations
Note:
e This function is not available when the display is
stored.
Auto storing while “TA” is lit:
Only TP stations are auto stored.
* Refer to PS/AS function in radio mode.
i
PTY
This function enables you to listen to selected pro-
gramme type, irrespective of the function mode.
PTY broadcasts are not yet available in all coun-
tries.
In TA standby mode, TP stations have priority
over PTY broadcasting stations.
* Emergency messages interrupt all modes of oper-
ation. They can only be received from RDS sta-
tions. “ALARM” appears in the display and mes-
sage can be heard.
Press the AF button [5] to cancel the ALARM
broadcasts.
Sedighomins we tf 8
Le Nee SSRN Bake So MS:
FRAT BEC Re
Selecting PTY
1) When you press the PTY button [5], “PTY”
lights and PTY appears in the display. The
unit enters PTY select mode.
CF RILE hous BOS LTRS INAS ORES
ike Cems Tipe, Grinnke * os Ese pases
$¢CLASSICS
CLASSICS
CT12:34
BED ait en ce
If the control is idle for 7 seconds after the
PTY select mode has been entered, the dis-
play automatically returns to radio mode dis-
play and the unit enters the PTY standby
mode.
Select a PTY.
Press one of the Preset buttons [9] to select
the desired PTY or select up or down to
obtain a desired PTY using the a-selector [1].
SCLASSICS
* The following stored already into the preset but-
tons for your convenience.
VRX8370R 21