Clarion VRX8370R - Page 22

RDS Operations
Pre’ Tenauish [__(Engish)
pt [NEWS [(News)
[2 [INFO| nformation
Popular music)
| 38
|
4
SPORT
__|
(Sports)
| 5
Depa Sal
CLASSICS | (Classic Music)
'M, O, R, M | (Middle of the Road Music)
3)
Press
the
PTY
button
[5]
again
to
enter
standby
mode
for
the
selected
PTY.
When
a
selected
PTY
broadcast
starts,
the
selected
PTY
appears
in
the
display.
If
you
press
the
PTY
button
[5]
during
PTY
broadcasts,
PTY
broadcasts
are
temporarily
cancelled
and
the
unit
enters
PTY
standby
mode.
:
Cancelling PTY standby mode
Press and hold the PTY button [5] for 2 seconds
or longer to turn off “PTY” in the display.
Preset memory of PTYs
1) Press the PTY button [5] to enter PTY select
mode.
lf the control is idle for 7 seconds after the PTY
select mode has been entered, the display
automatically returns to radio mode display
and the unit enters the PTY standby mode.
2) Select up or down to get obtain a desired
PTY using the «-selector [1].
The following 15 PTYs are selectable.
PTY Display
ENGLISH (English)
SPORT
EDUCATE
DRAMA
CULTURE
| VARIED | (Variety)
| POPM [| (Popularmusic)
(Other music)
LIGHT M
22 VRX8370R
3) Press and hold one of the Preset buttons 1 to
6 for 2 seconds or longer to put it into memo-
ry. After PTY is stored in memory, “PTY
MEMORY” appears in the display.
Seek tuning of PTYs
1)
Press
the
PTY
button
[5]
to
enter
PTY
select
mode.
2) Select a PTY.
3)
Select
left
or
right
using
the
a-selector
[1],
when
a
receivable
and
desired
PTY
is
found.
{tis
automatically
tuned
in.
If
you
select
left
or
right,
the
PTY
is
sought
in
the
direction
of
a
higher
or
lower
frequency
channel.
If no stations broadcasting selected a PTY,
seek
tuning
stops
at
the
previous
station
and
the unit stays in PTY standby mode.
Switching PTY display language
The PTY characters shown in the display can be
selected from 4 languages (English, German,
Swedish, French).
* The factory setting is “ENGL...
1) Press the ADJ button [15].
2) Select up or down until “PTY” is displayed
using the a-selector [1].
3) Select right to select the desired language
using the «-selector [1].
Each time you pressed the selector, the PTY
display language switches in the following
order:
C ENGL. -> DEUT. —-> SVENSK -—> FRANC. 7
4) Press the ADJ button [15] to return to radio
mode.
‘Note:
e Special characters other than alphabet characters
may not be displayed properly.
eT PE a eer Te er et ye neo ony shee