Clarion VX404 User Manual

22
VX404
English
Wire
Connection
of HDMI
can be connected by using the connector cable supplied with
and HDMI cable (sold in the market)
and digital
Av adapter.
(1) Connection with the iPhone 4 and iPhone 4s
VX404
iPhone 4 and iPhone 4s
Android phone
Apple Genuine
30pin-Digital AV adapter
(3) Connection with the Android phone
VX404
Apple Genuine 30pin cable
Micro USB cable sold in the market
MHL adaptor sold
in the market
(2) Connection with the iPhone 5, iPhone 5s and iPhone 5c
VX404
iPhone 5, iPhone 5s and iPhone 5c
Apple Genuine
Lightning-Digital AV adapter
Apple Genuine Lightning
TM
cable
HDMI cable sold in the market
HDMI cable sold in the market
HDMI cable sold in the
market
(4) Connec on with the equipment with HDMI output
VX404
Electronic devices with HDMI output
HDMI cable sold in the
market
iPhone 4, iPhone 4s, iPhone 5, iPhone 5s and iPhone 5c
iPhone 4, iPhone 4s, iPhone 5, iPhone 5s and iPhone 5c
Auto Store
The Auto Store is a function for storing up to 6 stations that are automatically
searched in sequentially. If the number of receivable stations cannot reach to 6, the
previous stored station remains.
1. Touch the [FM1/2/3/AM] button to select the desired band. (FM or AM)
2. Touch the [
] button, and then press the [ ] button to start the Auto Store.
A beep sounds and the stations with good reception are stored automatically to the
preset list.
Notes:
1. After auto store, the previous stored stations will be overwritten.
2. The unit has 4 bands, but FM3 and AM can store by Auto Store function.
Preset Scan
The Preset Scan receives the stations stored in the preset memory in order. This
function is useful when searching for the desired station in memory.
1. Touch the [FM1/2/3/AM] Button to select the desired band. (FM or AM)
2. Touch the [
] button to start the Preset Scan.
The unit starts scanning each station for 10 seconds sequentially. But the station
stored is not a valid station; the scanning time is only 2 seconds.
3. When the desired station is tuned in, touch the
[
] button again to stay in that station.
Mode Setting
The DX / Local setting changes the tuner sensitivity in order to separate closely
spaced stations. This feature is useful in areas that have many radio stations in
close proximity.
14. HDMI MODE
Note:
The following is part of the wiring example.
Depending on the device, there is a case to connect to the device directly with the CCA-771.
Depending on the adapter or device, there is a case that the audio noise and video noise is
generated.
VX404_quick start guide_EN_InDesign.indd 22 2014-4-4 13:58:43

Clarion VX404 Specifications

General

Brand	Clarion
Model	VX404
Category	Car Receiver
Language	English