Clarion VX404 - 8. CD PLAYER OPERATIONS; Listening to a Disc;Ejecting a Disc; Showing CD Player Mode Screen; Operate the CD Player Menu

21
VX404
English
Select the Cellular Phone
To change the current cellular phone to the other device which is already
registered, perform the following operation.
1. Touch the [ ] button to display the Device Select screen.
2. Touch the currently connected device, then touch
[
] button to disconnect the active device.
3. Touch the desired Device button you wish to use. Touch [
] button to select
it as your active device. The corresponding cellular phone is set as the current
telephone.
• If the power of the cellular phone is not turned on, turn it on.
• The cellular phone may prompt to acknowledge the Bluetooth connection or to
enter the Pass Key code of this unit. Perform these operations according to the
message displayed.
4. Touch the [ ] button to return to the previous screen.
Obtaining the Phone Book Data
Sending the Phone Book data from the cellular phone enables you to make a call
using the Phone Book function from this unit.
Telephone Operations
Making a call using the Ten-Key pad
1. Touch the [ ] button to display the Ten-Key pad screen.
2. Enter the telephone number by using the Ten-Key pad displayed on the screen.
Listening to the Tuner
1. Preset Scan button
2. Seek down
3. Seek up
4. Step down
5. Step up
6. Frequencies display
7. System time
8. Bluetooth status indicator
9. Preset list
10. DX/Local indicator
11. Band button
12. Shortcut button
13. Option button
13. TUNER OPERATIONS
13
12
7
11
8
9
10
21 3
4
6
5
VX404_quick start guide_EN_InDesign.indd 21 2014-4-4 13:58:42