Clarion VX404 User Manual

28
VX404
English
INSTALLATION
1. This set is exclusively for use in cars with a negative ground 12 V power supply.
2. Read these instructions carefully.
3. Be sure to disconnect the battery “-”
terminal before starting. This is to prevent
short circuits during installation. (Figure 1)
2. Package Contents
1. Before Starting
Main unit .........................................................................................................................1
Wiring harness
................................................................................................................1
Owner’s manual (CD-R)
...................................................................................................1
Quick Start Guide and Installation manual
.........................................................................1
Warranty card............................................................
......................................................1
Remote controller ...........................................................
................................................1
CONTENTS
1. Before Starting ..........................................................................................................28
2. Package Contents ....................................................................................................28
3. General Cautions ......................................................................................................28
4. Cautions On Installation .............................................................................................28
5. Installing The Main Unit ..............................................................................................29
Figure 1
Car battery
HDMI cable holder................................................................ ...........................................1
RCA output cable.......................................................................................
.....................1
Electro tap
.......................................................................................................................2
Flush mount bolts
...........................................................................................................8
Hexagon Head Screw
......................................................................................................8
3. General Cautions
1. Do not open the case. There are no user- serviceable parts inside. If you drop anything into
the unit during installation, consult your dealer or an authorized Clarion service center.
2. Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzine, or alcohol
etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently.
1. Prepare all articles necessary for installing the source unit before starting.
2. Install the unit within 30° of the horizontal plane. (Figure 2)
3. If you have to do any work on the car body, such as drilling holes, consult your car dealer
beforehand.
4. Use the enclosed screws for installation. Using other screws can cause damage. (Figure 3)
VX404
Figure 2
Figure 3
Chassis
Chassis
Damage
Max. 8 mm (M5 screw)
4. Cautions on Installation
VX404_quick start guide_EN_InDesign.indd 28 2014-4-4 13:58:44

Clarion VX404 Specifications

General

Brand	Clarion
Model	VX404
Category	Car Receiver
Language	English